1988 Nissan Pulsar NX Service Manual Download

The 1988 Nissan Pulsar NX Service Manual provides comprehensive technical information for maintaining and repairing the 1988 Nissan Pulsar NX model. This manual covers engine specifications, transmission systems, electrical systems, suspension, brakes, steering, and routine maintenance procedures. Below are key sections for technical specifications, maintenance schedules, repair procedures, troubleshooting, and download information.

1. Vehicle Specifications 2. Maintenance Schedule 3. Engine System 4. Transmission & Drivetrain 5. Electrical System 6. Brake System 7. Suspension & Steering 8. Troubleshooting Guide 9. Safety Precautions 10. Download Information

Vehicle Specifications

Key technical details for the 1988 Nissan Pulsar NX including engine options, dimensions, and performance characteristics.

SpecificationDetails
Engine Type1.6L E16i SOHC inline-4
Displacement1597 cc
Horsepower88 hp @ 5200 rpm
Torque94 lb-ft @ 2800 rpm
Transmission5-speed manual / 3-speed automatic
Fuel SystemElectronic fuel injection
Wheelbase94.5 inches
Curb Weight2150 lbs
Fuel Capacity13.2 gallons

Maintenance Schedule

Recommended service intervals for optimal vehicle performance and longevity.

  1. Oil Change: Every 3,000 miles or 3 months
  2. Spark Plugs: Every 30,000 miles
  3. Timing Belt: Every 60,000 miles
  4. Brake Fluid: Every 15,000 miles or annually
  5. Coolant Flush: Every 30,000 miles or 2 years
  6. Air Filter: Every 15,000 miles
  7. Fuel Filter: Every 30,000 miles

WARNING! Always use manufacturer-recommended fluids and parts. Failure to follow maintenance schedule may void warranty.

Engine System

Detailed procedures for engine maintenance, repair, and troubleshooting.

  1. Engine Removal: Disconnect battery, drain fluids, remove accessories
  2. Cylinder Head: Torque sequence and valve adjustment specifications
  3. Fuel Injection: Diagnostic procedures and component testing
  4. Cooling System: Radiator, thermostat, and water pump replacement
  5. Ignition System: Distributor timing and spark plug gap settings

CAUTION! Allow engine to cool completely before performing any maintenance. Use proper safety equipment.

Transmission & Drivetrain

Electrical System

Complete wiring diagrams and electrical component testing procedures.

Battery: Testing, charging, and replacement specifications. Alternator: Output test procedures and replacement. Starter: Bench testing and installation torque specifications. Lighting: Headlight adjustment, bulb replacement procedures. Instrument Cluster: Gauge testing and speedometer calibration.

Brake System

Brake system maintenance, repair, and safety inspection procedures.

  1. Disc Brakes: Pad replacement, rotor machining specifications
  2. Drum Brakes: Shoe replacement, drum diameter limits
  3. Hydraulic System: Master cylinder bench bleeding, line replacement
  4. Parking Brake: Cable adjustment and component replacement
  5. ABS System: Diagnostic trouble codes and sensor testing

Tip: Always replace brake components in axle sets for balanced braking performance.

Suspension & Steering

Front and rear suspension service procedures and alignment specifications.

  1. Strut Assembly: Removal, disassembly, and installation
  2. Control Arms: Bushings replacement and ball joint inspection
  3. Steering Gear: Rack and pinion service, tie rod replacement
  4. Wheel Alignment: Camber, caster, and toe specifications
  5. Wheel Bearings: Adjustment and replacement procedures

WARNING! Always use proper jack stands when working under vehicle. Never rely solely on hydraulic jacks.

Troubleshooting Guide

Common problems and diagnostic procedures for the 1988 Nissan Pulsar NX.

SymptomPossible CauseCorrective Action
Engine won't startFuel pump, ignition, batteryCheck fuel pressure, spark, battery voltage
Poor fuel economyO2 sensor, air filter, tiresReplace O2 sensor, check air filter pressure
Brake vibrationWarped rotors, worn padsResurface or replace rotors, install new pads
Steering wanderAlignment, worn componentsPerform alignment, inspect tie rods and bushings
Electrical issuesGround connections, alternatorClean ground points, test alternator output

Safety Precautions

Essential safety procedures for all maintenance and repair work.

CAUTION! Always disconnect battery before electrical work. Use jack stands when working under vehicle. Wear safety glasses and gloves. Properly dispose of fluids and hazardous materials.

Download Information

This service manual is available in PDF format for easy access and printing. The manual includes detailed illustrations, wiring diagrams, and step-by-step procedures for all major systems.

File Format: PDF
File Size: Approximately 45 MB
Pages: 385 pages
Language: English

For technical support or additional Nissan service information, contact Nissan Customer Service at 1-800-NISSAN-1 or visit www.nissanusa.com.

1988 Nissan Pulsar NX Service Manual © - All Rights Reserved 2025