1988 Honda Accord LX Shop Manual

The 1988 Honda Accord LX Shop Manual provides comprehensive technical information for maintenance, repair, and service procedures for the 1988 Honda Accord LX model. This manual covers engine specifications, transmission systems, electrical systems, suspension, brakes, steering, and body components. Below are key sections for specifications, maintenance procedures, troubleshooting, and technical data.

1. Vehicle Specifications 2. Engine Systems 3. Transmission & Drivetrain 4. Electrical Systems 5. Suspension & Steering 6. Brake Systems 7. Body & Interior 8. Maintenance Schedules 9. Troubleshooting Guide 10. Technical Data 11. Service Procedures

Vehicle Specifications

Key specifications for the 1988 Honda Accord LX including dimensions, capacities, and performance data.

SpecificationDescription
Engine Type2.0L 4-cylinder SOHC
Horsepower110 hp @ 5500 rpm
Torque114 lb-ft @ 4500 rpm
Transmission5-speed manual or 4-speed automatic
Fuel Capacity15.9 gallons
Curb Weight2624 lbs
Wheelbase102.4 inches
Length179.5 inches
Width67.4 inches
Height53.7 inches

Engine Systems

Detailed information on engine components, service procedures, and specifications.

  1. Engine removal and installation procedures
  2. Cylinder head service and valve adjustment
  3. Timing belt replacement intervals and procedures
  4. Fuel injection system service and troubleshooting
  5. Cooling system maintenance and repair

WARNING! Always disconnect battery before working on electrical systems. Use proper safety equipment.

Transmission & Drivetrain

Manual and automatic transmission service procedures and specifications.

  1. Transmission fluid specifications and capacities
  2. Clutch replacement and adjustment procedures
  3. Drive axle service and CV joint replacement
  4. Differential service and maintenance
  5. Shift linkage adjustment procedures

CAUTION! Use only recommended transmission fluids. Improper fluid can cause damage.

Electrical Systems

Suspension & Steering

Front and rear suspension components, alignment specifications, and steering system service.

Front Suspension: MacPherson strut design, coil springs, stabilizer bar

Rear Suspension: Double wishbone design, coil springs

Steering: Power steering system, rack and pinion, tie rod replacement

Alignment: Camber, caster, and toe specifications and adjustment procedures

Brake Systems

Front disc and rear drum brake service procedures and specifications.

  1. Brake pad and shoe replacement intervals
  2. Rotor and drum machining specifications
  3. Brake fluid bleeding procedures
  4. Master cylinder service and replacement
  5. Parking brake adjustment procedures

Tip: Always replace brake components in axle sets for optimal performance.

Body & Interior

Body panel replacement, interior component service, and trim procedures.

  1. Door panel removal and installation
  2. Window regulator service
  3. Seat removal and repair procedures
  4. Dashboard component service
  5. Exterior trim and molding replacement
  6. Paint codes and touch-up procedures
  7. Glass replacement specifications
  8. Weatherstrip installation procedures

WARNING! Use proper tools for trim removal to avoid damage to components.

Maintenance Schedules

Recommended maintenance intervals and service procedures.

Service IntervalRequired Maintenance
Every 7,500 milesOil and filter change, tire rotation
Every 15,000 milesAir filter replacement, brake inspection
Every 30,000 milesSpark plug replacement, coolant flush
Every 60,000 milesTiming belt replacement, transmission service
Every 90,000 milesFuel filter replacement, brake fluid flush

Troubleshooting Guide

Common problems and diagnostic procedures for the 1988 Honda Accord LX.

SymptomPossible CauseCorrective Action
Engine won't startBattery, starter, fuel systemCheck battery voltage, test starter, verify fuel delivery
Poor fuel economyAir filter, oxygen sensor, tiresReplace air filter, test O2 sensor, check tire pressure
Brake vibrationWarped rotors, worn componentsInspect and machine rotors, check brake components
Steering pullAlignment, tire pressure, suspensionPerform alignment check, adjust tire pressure, inspect suspension
Electrical issuesBattery, alternator, groundsTest charging system, check ground connections

Technical Data

Torque specifications, fluid capacities, and technical reference information.

Service Procedures

Step-by-step service procedures for common maintenance tasks.

  1. Oil change procedure and filter replacement
  2. Brake service and component replacement
  3. Timing belt replacement procedure
  4. Spark plug replacement and gap setting
  5. Coolant system flush and refill
  6. Wheel bearing service and adjustment
  7. CV joint replacement procedures
  8. Exhaust system service and component replacement

Service Support: Contact Honda Technical Support for additional assistance

1988 Honda Accord LX Shop Manual © - All Rights Reserved 2025