1986 Yazoo Model S22 Parts Manual

The 1986 Yazoo Model S22 is a commercial-grade zero-turn riding mower featuring a 22 HP engine, 52-inch cutting deck, hydrostatic transmission, heavy-duty steel construction, and commercial-grade components. This parts manual provides comprehensive information for maintenance, repair, and replacement of all components. Below are key sections covering specifications, engine components, cutting system, transmission, electrical system, and troubleshooting.

1. Specifications Overview 2. Engine Components 3. Cutting System Parts 4. Transmission & Drive System 5. Electrical System 6. Frame & Body Components 7. Controls & Operator Station 8. Maintenance Schedule 9. Parts Ordering Information 10. Troubleshooting Guide

Specifications Overview

Key specifications: 22 HP commercial engine, 52-inch fabricated steel deck, dual hydrostatic transmission, zero-turn radius capability.

ComponentSpecification
Engine22 HP Commercial Kohler Command Pro
Cutting Deck52-inch fabricated steel, 3-blade system
TransmissionDual hydrostatic pumps with wheel motors
Fuel Capacity6.5 gallons
Cutting Height1.5 to 5 inches (12 positions)
Turning RadiusZero-turn capability
Weight785 lbs
Speed Range0-8 mph forward, 0-4 mph reverse
Blade TypeHigh-lift commercial blades
WheelsFront: 13x6.5-6, Rear: 23x10.5-12

Engine Components

Kohler Command Pro 22 HP engine parts and maintenance requirements.

  1. Air Filter: Replace every 100 hours (part #YAZ-ENG-AF22)
  2. Spark Plugs: Champion RC12YC, gap 0.030" (part #YAZ-ENG-SP22)
  3. Oil Filter: Kohler 52-050-02-S (part #YAZ-ENG-OF22)
  4. Fuel Filter: In-line replaceable (part #YAZ-ENG-FF22)
  5. Ignition System: Solid-state electronic ignition

WARNING! Always disconnect spark plug before servicing engine components. Allow engine to cool completely.

Cutting System Parts

52-inch fabricated steel deck with three-blade spindle system.

  1. Blade Spindles: Heavy-duty sealed bearings (part #YAZ-CUT-SP52)
  2. Cutting Blades: High-lift 18-inch blades (part #YAZ-CUT-BL18)
  3. Deck Belt: ½-inch x 95-inch (part #YAZ-CUT-BT95)
  4. Deck Wheels: 8-inch anti-scalp (part #YAZ-CUT-DW8)
  5. Deck Lift System: Manual 12-position adjustment

CAUTION! Always engage parking brake and remove key before servicing cutting system.

Transmission & Drive System

Electrical System

12-volt electrical system with key start and safety interlock system.

Components: Battery (12V 250CCA), Starter Motor, Alternator, Safety Switches, Wiring Harness.

Battery: Group U1 (part #YAZ-ELC-BAT). Starter: 12V gear reduction (part #YAZ-ELC-STR). Alternator: 15 amp output (part #YAZ-ELC-ALT). Fuses: 20 amp main, 10 amp accessory. Safety System: Seat switch, blade engagement switch, parking brake switch.

Frame & Body Components

Heavy-duty steel frame construction with commercial-grade components.

  1. Main Frame: 7-gauge steel (part #YAZ-FRM-MAIN)
  2. Rollover Protection: Optional ROPS structure
  3. Seat: High-back suspension seat (part #YAZ-BDY-SEAT)
  4. Fuel Tank: 6.5 gallon polyethylene (part #YAZ-BDY-FT65)
  5. Fenders: Steel reinforced (part #YAZ-BDY-FND)

Tip: Inspect frame for cracks and rust during routine maintenance.

Controls & Operator Station

Ergonomic control layout with dual lever steering and integrated dashboard.

  1. Control Levers: Dual hydrostatic control (part #YAZ-CTL-LEV)
  2. Dashboard: Hour meter, indicator lights (part #YAZ-CTL-DASH)
  3. Ignition Switch: Key start with positions (part #YAZ-CTL-IGN)
  4. Blade Engagement: Electric PTO switch (part #YAZ-CTL-PTO)
  5. Parking Brake: Manual engagement lever
  6. Height Adjustment: Manual lever with 12 positions
  7. Seat Adjustment: Slide and suspension adjustment

WARNING! Always engage parking brake when dismounting mower.

Maintenance Schedule

Regular maintenance intervals for optimal performance and longevity.

IntervalService RequiredParts Needed
Every 8 hoursCheck engine oil level20W-50 oil
Every 50 hoursChange engine oilYAZ-ENG-OF22, oil
Every 100 hoursReplace air filterYAZ-ENG-AF22
Every 200 hoursReplace spark plugsYAZ-ENG-SP22
Every 500 hoursChange transmission fluidYAZ-TRN-FLT, fluid

Parts Ordering Information

Genuine Yazoo parts available through authorized dealers only.

Ordering: Contact local Yazoo dealer with part numbers. Warranty: 3-year commercial warranty on frame, 1-year on engine. Technical Support: Available through dealer network.

Troubleshooting Guide

SymptomPossible CauseCorrective Action
Engine won't startBattery/safety switchesCheck battery charge; verify safety switches engaged; check fuel.
Poor cutting performanceDull blades/belt tensionSharpen/replace blades; adjust deck belt tension.
Hydrostatic drive issuesLow fluid/belt wearCheck transmission fluid level; inspect drive belts.
Excessive vibrationUnbalanced blades/debrisBalance blades; clean deck of debris; check spindle bearings.
Electrical problemsCorrosion/bad connectionsClean battery terminals; check wiring connections; test fuses.

Service: Contact authorized Yazoo dealer for technical support and warranty service.

1986 Yazoo Model S22 Parts Manual © - All Rights Reserved 2025